www.grayhill.com operating temperature ansi/asae ep455 5.1.1 level 2: -50c to +85c with optional heater -25c to +85c without heater storage temperature ansi/asae ep455 5.1.2 level 2: -50c to +85c thermal shock ansi/asae ep455 5.1.3 -40c to 70c at a rate of 4c/min (1 hour at extremes) altitude (barometric pressure) ansi/asae ep455 5.2 101.3kpa to 18.6kpa sand and dust sae j1455 solar radiation iso 4892-2 method b wash down ansi/asae ep455 5.6 level 2 humidity ansi/asae ep455 5.13 96% humidity at 35c for 240 hours salt fog ansi/asae ep455 5.9 5% aqueous solution of nacl @ 35c and a ph between 6.5 and 7.2 for 48 hours chemical resistance iso 16750-5 ep 455 5.8.2 ingress protection ip67 with mating connector your experts in cab controls grayhill specializes in the design, development and production of human interface controls, including: - cab user interface design - customized control panels - can-bus interface devices environmental specifications the microdisplay makes it easy to create screens with custom graphics, text and even gauges that automatically adjust based on j1939 values. due to its innovative design, native coding is not required for custom user interfaces. screens and graphic objects are created with the included pc software tool and stored in the on-board ? ash memory. when in use the microdisplay can be controlled two different ways. first, a vehicle?s ecu (electrical control unit) can send and receive commands to con- trol the display. second, with the new menu object and screen list object the display can be programmed to provide stand-alone functionality. the menu object allows users to enter and navigate a menu using the menu key. the screen list object allows users to quickly navigate through favorite screens (objects) by pressing one of the right and left arrow buttons. graphic microdisplay easily display custom graphic icons, text boxes and active gauge elements. - use pc-based software tools to develop graphic objects - store graphic objects in on-board ? ash memory - recall objects at run time via j1939 commands - recall objects at run time using the menu object - recall objects at run time using the screen list object controlled via j1939 pgns - native coding not required ideal for off-highway vehicle applications - virtual gauges - diagnostic menus - fault indicators & service reminders rated for off-highway vehicles - extended operating temperature range: -50o c to +85oc (with heater) - protected against the ingress of liquids and dust: ip67 rated seal 3.2-inch backlit lcd (256x128) - excellent daylight readability - trans? ective lcd with anti-glare - software controlled rgb backlighting - four level grayscale graphics custom options available - keypad backlight color - key colors and legends - icons/screens pre-loaded system interface - one can-bus port - two 200ma outputs (standard option) - three discrete inputs (standard option - one rs-485 serial port (custom option) styled to sit next to grayhill standard 20-button 3k keypad
www.grayhill.com grayhill, inc. 561 hillgrove avenue phone: (708) 354-1040 lagrange, illinois 60525 fax: (708) 354-2820 bulletin 1144 rev 07/13 dimensions 3.2 [81,28] speci? cations subject to change vibration, random ansi/asae ep455 5.15.1 2h each axis @52.4m/s2 rms overall acceleration and spectral power density of 2m2/s3 from 50hz to 2000hz vibration, sinusoidal ansi/asae ep455 5.15.2 a logarithmic sweep from 10hz to 2000hz to 10hz over a period of 20 minutes for 4 hours in each of 3 orthogonal axes with amplitude 1.5mm from 10hz to 40hz and a constant acceleration of 35m/s2 rms from 40hz to 2khz shock / crash safety ansi/asae ep455 5.14 11ms half sine pulse of 490 m/s2 in 3 perpendicular axes drop ansi/asae ep455 5.14.2 level 1 drop component 400 mm onto a hardwood benchtop on all practical edges. mechanical performance esd ansi/asae ep455 5.12 level 1 +/- 25kv radiated immunity ep455 5.16 level 1 conducted emissions sae j1113-41 level 4 radiated emissions iso14982 electromagnetic compatibility specifications maximum load ansi/asae ep455 5.1.1 level 2 jump start voltage ep455 5.10.2 36v for 60 minutes; -36v for 60 minutes short circuit protection ep455 5.10.4 36v reverse polarity protection ep455 5.10.3 -36v starting pro? le iso 16750-2 level ii code c, level iv code a battery-less operation ansi/asae ep455 5.11.3 level 2 load dump iso 7637-2 test pulse 5b us* = 60v switching spikes iso 7637-2 test pulse 3a and 3b wire harness inductance iso 7637-2 test pulse 2a and 2b wire harness inductance- switching iso 7637-3 test pulse a and b inductive load pulse ansi/asae ep455 5.11.4 mutual coupling ansi/asae ep455 5.11.6 level 2 alternator ? eld decay ansi/asae ep455 5.11.2 electrical performance specifications contact grayhill for custom options part number description 3d32xk-200 microdisplay with can, i/o 3d32hk-200 microdisplay with can, i/o and heater 3d32xkr-200 microdisplay with can 3d32hkr-200 microdisplay with can and heater 3D32CABLE-1 microdisplay programming cable with power supply rear connector 0 function 1 v in positive 2 v return 3 rs-485 + 4 rs-485 - 5 digital in 1 6 digital in 2 7 digital in 3 8 digital out 1 9 digital out 2 10 can shield 11 can hi 12 can low mating connector: deutsch dt06-12sa www.grayhill.com mounting info use m6 nut (1mm pitch) max torque 25 in-lbs ce compliance emc en 13309:2010 esa
|
